Maintenance Apprentice- 2nd Shift

Since 1869 we've connected people through food they love. Our history was created by remarkable people, ideas, and innovations. It serves as inspiration and foundation for our future success.

We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, noosa, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover.

We foster a culture of belonging where people come first, and diversity is embraced. And we live our values, always, while setting the highest standards for performance.

Here, you will make a difference every day. You will be part of a dynamic, collaborative, and competitive team. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us.

LOCATION: Downers Grove

DEPARTMENT: Maintenance

JOB TITLE: Maintenance Trainee

WORKDAY GRADE LEVEL: H008

BASE RATE PER HOUR: $32 ($31.80 - $38)

SHIFT: 2nd Shift

# OF OPENINGS: 1

HOURS: 1:45 PM-Finish
(Starting times and hours may vary depending on coverage due to report-offs and the production schedule especially during holidays.)

JOB SUMMARY/ JOB DUTIES:
The maintenance trainee will complete 4 EEAS class at Joliet Junior College. EEAS 101 Basic wiring and circuit design, EEAS 111 & 113 Industrial controls I & II, and EEAS 115 Electrical / electronic troubleshooting. A strong recommendation to complete EEAS 240 Motors and drives. The maintenance trainee will work closely with the shop mechanics to gain the plant specific skill sets to work independently and progress to an Apprentice Mechanic to perform facility and plant equipment repairs, conduct daily inspections and root cause investigation of failures.
* Must adhere to all safety programs and policies.
* Maintains plant equipment by interpreting shop manuals and schematic drawings and through verbal instruction from supervision/co-workers.
* Must have mechanical aptitude and manual dexterity and ability to use hand and power tools correctly and safely.
* Must be able to operate shop equipment such as welders, lathes, grinders, and mills safely and accurately.
* Ability to retain and recall detailed technical information.
* Performs precise measurements and tests.
* Must be able to interpret ladder logic and basic control circuits.
* Works with minimum supervision.
* Works in temperature extremes and high places, climbing ladder, scissor lifts, WAV lifts.
* On occasion, works in flour/ingredient dust.
* Must communicate accurately with co-workers and team members from other departments.
* Submits daily document reports.
* Answer breakdown repair calls, reporting to all departments as a service technician.
* Operates a life truck and must pass licensing requirements.
* Basic computer knowledge to provide reports and/or data and documentation in various programs including Microsoft Office, SAP, and E-mail
* Ability to effectively communicate verbally and in writing to ensure open and clear communication between team members, departments and/or customers
* Follow company policies and programs including but not limited to Safety, HAACP, GMP, SQF
* Other Duties as assigned.

SUPERVISORY RESPONSIBILITIES:
This job has no direct supervisory responsibilities but may need to direct contractors on larger installations as required. The Maintenance Mechanic is required to continually demonstrate the following qualities: Winning Attitude, Interpersonal Skills, Leadership, Good Manufacturing Practices, Safety, Quality of Work, Productivity, Attendance and Dependability, Teamwork, and Adherence to our Company's Core Values.

COMPETENCIES:
* Successfully complete the required EEAS classes from JJC.
* Develop the skill set to use electrical diagnostic equipment such as multimeters.
* Develop the skill set to read and comprehend to read, interpret, and modify electrical prints and schematics and document all self-created changes.
* Develop the skill set of explosion proof and intrinsically safe work environments. Knowledge of applicable NEC and NFPA codes.
* Develop the understanding of industrial electrical systems, including DC voltage and AC voltage up to 600V.
* Develop the skill set of relay and discrete device control systems.
* Develop the skill set to of electrical installations with conduit and wiring practices.
* Gain experience using sensing and control devices.
* Gain Experience using both DC and AC motors, VF Drives and Servo Controlled Systems (Allen Bradley preferred).
* Must be able to read and comprehend simple instructions and have the ability to write simple correspondence and memoranda.
* Must be able to communicate with respect, to all levels of employees.
* Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to read a ruler and tape measure using Metric and English units of measure.
* Must have the ability to carry out instructions furnished in written, oral, or diagram form. Ability to troubleshoot problems involving several variables.
* Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.

EDUCATION/EXPERIENCE:
* Must possess a high school diploma or general education degree (GED); Associates degree or higher degree preferred.

CERTIFICATES/LICENSES/REGISTRATIONS:
* Forklift Operator Certification

PHYSICAL REQUIREMENTS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee may be required to:
* Stand for extended periods of time
* Use hands, fingers and arms to reach, feel product and manipulate materials and equipment
* Walk, stoop, climb, kneel, crouch, crawl, talk and hear
* Ability to use senses to diagnose and troubleshoot problems
* Regularly lift and/or move up to 50 pounds and push/pull heavy loads up to 1500 pounds
* Works in temperature extremes and high places climbing ladders and operating scissor lift/forklift

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to vibration. The employee is frequently exposed to risk of electrical shock. The employee may be exposed to fumes, airborne particles, hot/cold temperature extremes, outside weather conditions, high industrial noise levels, forklift traffic, high/precarious places and wet/humid environments.
While performing the duties of this job, the employee is expected to comply with all safety regulations, support plant safety initiatives, proper operating procedures and utilize prescribed safety equipment such as safety eyeglasses, safety shields, gloves, earplugs, respirators, and approved footwear.

Ability to deal with a changing work environment and high-pressure situations. Must be able to work in a team environment.

This position may require overtime as deemed necessary to support operations activities.

Position is contingent on passing Powered Industrial Equipment physical and success completion of licensing requirements.

There will be a 90-day evaluation period to ensure satisfactory performance.

Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package.

The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.