CBA NDI Inspector - F-5 - Fallon, NV

Summary:

Performs non-destructive inspection (NDI) of aircraft, engines, support equipment, and components with specialized equipment such as a magnetic particle (portable or stationary), flaw detection units NORTEC 2000D, sonic 1200M, and x-ray equipment (LPX160) for the detection of faults or defects using methods such as eddy current, liquid penetrant, magnetic particle, ultrasonic and X-ray in accordance with written procedures. Required to handle hazardous materials in performance of assigned duties. May be required to perform Collateral Duty Inspector duties when designated and authorized. Must be customer oriented.

Essential Duties:

• 
  

  Non-destructively inspect aircraft, engines, support equipment, components, and accessories in accordance with Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdowns (IPBIs), Technical Directives (TDs), maintenance Requirements Cards (MRCs), Navy instructions, manufacturer's manuals, schematics, company instructions and other approved data.

  
  
• 
  

  Maintains efficiency logs and records in accordance with COMNAVAIRFORINST 4790.2 Series.

  
  
• 
  

  Coordinate with supervision and quality control -to resolve questions concerning serviceability and/or repair procedures.

  
  
• 
  

  Assist with ordering parts, tools, materials and equipment as required.

  
  
• 
  

  Document work accomplished on Maintenance Actions Forms (MAF) or work orders in NALCOMIS System.

  
  
• 
  

  Thorough knowledge of corrosion detection and review.

  
  
• 
  

  Maintain cleanliness of the work center and around your assigned work areas.

  
  
• 
  

  Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations including participation in FOD walk down when directed.

  
  
• 
  

  Responsible for adhering to the company tool control program.

  
  
• 
  

  Will be required to perform simple computer inputs and extractions.

  
  
• 
  

  Comply with established general and industrial safety rules and regulations as applicable to the contract, facilities and job assignment.

  
  
• 
  

  Perform corrosion control cleaning, prevention, and treatment as required.

  
  
• 
  

  Perform preventative maintenance on assigned shop and support equipment.

  
  
• 
  

  Comply with established hazardous material/waste program and Local, State, and Federal Environmental Protection Agency regulations.

  
  
• 
  

  May be required to perform off-site services on assigned detachments.

  
  
• Perform maintenance in support of O, I and D level.

Qualification Standards:

• During the last five (5) years, must have a minimum of three (3) years recent aircraft and component non-destructive inspection experience in inspection techniques such as eddy current, liquid penetrant, magnetic particle, ultrasonic, radiographic (Radiographic not required for DEPOT) and at a minimum meet NAS 410 level II NDI requirements.
• A working knowledge of aircraft, engine and aviation related support equipment. Will work with other shops to meet their requirements.
• Familiarization with COMNAVAIRFORINST 4790.2 Series and other applicable Navy instructions, Radiological Affairs Support Program (RASP) Manual NAVSEA S0420-AA-RAD-010 (RAD-010), Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdown (IPBs), manufacturer's manuals and company instructions, Quality Management Systems defined by ISO Standards.
• Maintain knowledge of material safety data sheet and applicable safety precautions.
• Must have a valid state operator's license and be able to pass the Government licensing requirements.
• Must be knowledgeable in handling and disposing of hazardous material/waste.
• Must be able to read, speak, write legibly and understand the English language.
• May be required to become Aircraft and Support Equipment Wheel and Tire qualified and certified.
• Must be able to provide the following documents before hire:
  
  
  
  • Original certification,
  • Certification for 40 hours of Radiation Safety Training (Formal),
  • Inspection hours performed for each method, and
  • Any other certification for methods
  
  
  
  
• As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042. Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation. A vaccination status form and proof of vaccination, if applicable, is required.

Physical Demands and Environmental Conditions:

This classification activity is usually accomplished in a hangar and shop environment and as such requires the scope of physical movements and postures normally associated with bending, stooping and climbing ladders. May be required to lift objects whose weight normally will not exceed 50 pounds. Special vision abilities required to perform this job are close vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. Must pass required reoccurring physical (Radiation Physical).

The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to changes in temperature and weather. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards.

Licensing and Certification Requirements:

The following must be obtained upon hire:

• NDI Level II
• Formal or Specialized Training/Equivalent
• Valid State Driver's License

The following must be obtained within 6 months of start date:

• Hazardous Waste Communications Training
• FOD and TCP Awareness Trained
• Security Clearance Awareness Training
• COMNAVAIRFORINST 4790.2 Program Awareness
• ISO 9001-2000 Program Awareness
• NALCOMIS Trained
• Ground Support Operator Certified
• Tire and Wheel Certification #
• Operational Risk Management (ORM) Training

Collateral Duty Inspector (may be required) #

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.

• Benefits include the following:
  
  
  
  • Healthcare coverage
  • Retirement plan
  • Life insurance, AD&D, and disability benefits
  • Wellness programs
  • Paid time off, including holidays
  • Learning and Development resources
  • Employee assistance resources
  
  
  
  

• Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.