Power Generation Electrician - General Construction

Requisition ID# 166721

Job Category: Maintenance / Construction / Operations

Job Level: Individual Contributor

Business Unit: Operations - Other

Work Type: Onsite

Job Location: Auberry

Department Overview

Power Generation operates and maintains PG&E's hydroelectric, fossil, solar generation and battery storage facilities, providing approximately 5,300 megawatts of generating capacity for our customers. Our nearly 900 coworkers are dedicated to delivering safe, reliable and cost-effective generation to California in an environmentally responsible manner. Our hydro facilities include 62 conventional hydro powerhouses, a pumped-storage facility, 98 reservoirs, 168 dams and morethan 200 miles of canals and flumes, among other water conveyances. Natural gas-fired plants in operation are Humboldt Bay Generating Station in Eureka; Colusa Generating Station in Colusa County and Gateway Generating Station in Antioch. Several utility-scale solar generation plants also are operated and maintained, as well as PG&E's successful entry into battery energy storage, our Elkhorn Battery facility at Moss Landing in Monterey County.

Position Summary

This classification is represented by the International Brotherhood of Electrical Workers (IBEW) local 1245, which has over 100 years of experience representing employees at PG&E.

This position may be subject to the Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of electrician roles and responsibilities.

General Construction (GC)

For GC positions individuals must be able to travel and transfer to a new headquarters upon request at any time, throughout the entire PG&E service territory with no guarantees as to how long you will be away from home.

• Attends and participates in tailboards.Reviews, verifies, and modifies prints and electric schematics. Lays out materials for installation, such as conduit, steel, wires, junction boxes, tools, etc. Places orders for supplies as needed.
• Moves equipment to staging area. Performs safety preparation including performing high voltage protective grounding.
• Uses power tools and hand tools to install equipment and systems, such as wire terminations, high voltage equipment, overhead and underground electrical and conduit systems, steel structures, control panels, metering and protection systems, air switches. Sets up rigging. Pulls wire.
• May operate construction equipment, if qualified, such as crane truck, man lift, boom truck, bucket truck as part of installation, excavation, and compaction. Operates forklift to move and reposition equipment.
• Uses hand and power tools, such as jackhammers, whackers, and shovels to remove and replace soil.
• Removes old high voltage equipment, structures and other impediments prior to installation using heavy equipment, rigging and other tools.
• Drives equipment on the job site (substation). May drive equipment from one job site to another. May drive a company vehicle to pick up tools or other equipment away from the job site.
• Maintains work area in a clean and safe condition. Removes trash, debris, and excess materials. Picks up and reorganizes tools.
• Overtime may be required.

PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time ofthe jobposting. This position issubject to collectively bargained hourly wage rates and increases. The starting wage rate for thisposition is $68.56 per hour. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors,including, but not limited to, specific skills, education, licenses or certifications,experience, market value, geographiclocation, collective bargaining agreements, and internal equity.

Minimum Qualifications:

• Must be at least 18 years of age.
• Must possess a High School diploma or GED.
• Must possess and maintain a valid California Class C Driver's License
• Must show proof of successful completion of a Union Sanctioned Inside Wireman Electrician Apprenticeship
• Ability to work in all types of weather extremes.
• Ability to drive safely in all weather and road conditions.
• Must be willing to travel/ transfer to new headquarters upon request at any time; throughout the entire PG&E service territory with no guarantees as to how long you will be away from home (For GC positions)
• Ability to work extended hours, nights, weekends and holidays, and various work schedules.
• Ability to work in remote work locations with potential exposure to poison oak, snakes, spiders, bees, mosquitoes, ticks, rodents etc.
• Must be able to wear company provided Personal Protective Equipment (PPE)
• If hired as Provisional, must pass the provisional training plan within 12 months from hire date.
• CA CDL Class A Permit, or equivalent, subject to 150% driver/vehicle ratio

Desired:

• 3-5 years Journey level experience in commercial or industrial electrical construction
• PG&E construction or utility experience
• Experience with electronic or mechanical equipment
• Instrumentation and Control experience
• Motor Control experience
• Electrical Substation or Power Generation experience
• High voltage experience
• Experience working with testing equipment and troubleshooting

Pre-Employment Testing:

PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application; and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit thePre-employment testing programwebsite.

• Physical Test Battery (PTB)
• Work Orientation Inventory-Physical/Technical Driving (WOI-D)
• Electrician Assessment