CNC Production SUO 1st shift

CNC Production SUO 1st shift

Company: Monogram Aerospace Fasteners

Primary Location: 3423 S Garfield Avenue, Commerce, CA 90040 USA

Workplace Type: On-site

Employment Type: Hourly | Full-Time

Function: Manufacturing Production / Distribution

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Main Duties & Responsibilities

Summary/Objective

Completely and independently set-up
and operate computerized numerically controlled machine
tools to perform a series of machine operations on blind fastener
components to close and exacting tolerances and
finish per designated specifications. Troubleshoots and resolves
problems related to C N C machined parts.

Essential Functions

Under
general direction with periodic supervision or review performs the following:

1. Sets up C N C machines making required adjustments to tooling, collets, etc. Running machines with chucker automatic load systems. Troubleshoots and resolves various problems related to the set-up and operation of tooling, work holding etc. of an auto loading C N C machine tool.
2. Read and interpret drawings, programs, and other documentation to visualize machining required and sequence of operations.
3. Makes input to C N C consistent with set up procedure. Fills out Setup Card for preset or setup of tools to be used in operation of CN C machine. Performs dry run to verify setup prior to production run. Recognizes and reports errors n programming and operations. Collaborates with appropriate personnel in correcting errors.
4. Provides necessary counts, processes documentation correctly, and maintains daily production logs or production worksheets.
5. Utilizes SPC techniques and methods to ensure workflow efficiency.
6. Maintains SYMIX database accuracy by recording work progress in a timely and efficient manner.
7. Works as an active team member by participating in problem solving, team building, and all other team activities to improve the processes, productivity, quality,etc.oftheproductionoperations.

8. Uses interpersonal skills as
well as good written and verbal communications. Assist other employees as
required.

Equipment/Process Responsibilities - Performs duties where significant
property, tools, equipment or machines may be damaged, or man-hours lost,
through improper daily maintenance and attention to processing. Inputs set-ups
and maintains CNC machines for the jobs performed. Performs Total Productive
Maintenance as required.

Material or Product Responsibilities - Performs duties that require
close attention to work and supporting documentations specifications and other
requirements. Responsible for accuracy of parts formed. Visually and / or with
measuring instruments, checks work performed for proper results.

Responsibility for Work of Others - After setup, continues
responsibility for job order accuracy and productivity during production run.
Accuracy of communication is mandatory to the successful production and
qualification of workpieces. Must communicate to appropriate personnel any
problems or concerns regarding quality of work received or time flow of work in
progress as it affects production schedules. Must be able to train employees of
equal of lower classification in C N C machine
set-up and operation as well as on methods and procedures used by the
Company in the production workflow and tracking. Communicates primarily with
CNC employees including programmer and supervisor.

Safety Responsibilities - Good housekeeping, knowledge of
good machine safety is necessary as well as adherence to and enforcement of
Company Safety Rules.

Initiative and
Ingenuity - Requires initiative in solving
problems associated with the programming, setup and operation of CNC machines
and ingenuity in adapting tooling and shop aids to complete operations. Makes
suggestions for improving the efficiency of work flow or equipment operation.
Troubleshoots and resolves CNC related problems. Takes on or reports for
additional work as w\current tasks are completed. Performs other work-related
tasks, as deemed necessary by Company needs.

WORK
ENVIRONMENT

Environmental Surroundings - Work is in a machine shop
environment where noise, temperature fluctuations, the repetitive nature of the
job, etc. are less desirable than a typical office environment.
Unavoidable Hazards - Possible hazards related to cuts, bruises,
finger and hand injuries, and muscle strains. Exposure to moving mechanical parts, metalworking fluids,
and airborne particles. Appropriate protective wear regarding eye, ear and
clothing are required.

EFFORT

Physical - Able to lift up to 50 pounds. Requires strength to install
and adjust tooling and equipment to set-up specifications. Hand and finger
manipulation required for machine set-up and operations as well as using
precision measuring instruments. Most job assignments require continuous
standing and / or walking for extended periods.

Mental - Work at times is highly
repetitive and monotonous. Set-up work may require use of machine shop theory,
improvisation and ingenuity. Reasoning ability required to interpret drawings
and documentation of a technical nature. Required to organize workflow for best
efficiency.

Visual - Close attention to detail with moderate eye concentration
over long periods of time. Able to read various precision instruments such as
micrometers, calipers, comparator, gauges, etc. Must be able to visually check
workpieces for quality.

Qualifications

EDUCATION/TRAINING
Demonstrated ability to read and write English of a level required in Company shop documents. Must demonstrate and be capable of applying mathematical operations using fractions, decimals, trigonometry and geometry as required by machining operations. Generally equivalent to journeyman trade school graduate. Demonstrate math and English proficiency through Company testing as required.

EXPERIENCE
Requires 3-5 years work experience or equivalent skills and knowledge expertise in the set - up and operation of Computerized Numerical Control machines, tools and equipment which are similar or comparable to those used by the Company and which are necessary to fulfill job requirements. Must have demonstrated the capability to set - up and operate the CNC machines required to the level of journeyman. Must be familiar with and capable of using Statistical Process Control. Must read precision measuring instruments such as comparators, indicator, calipers and micrometers. May be required to perform other jobs as needed by the Company

Compensation

In compliance with all states and cities requiring transparency of pay, the expected pay range for this position is $31.42 - $37.89. LG 10

Compensation can vary depending on several factors, including a candidate's qualifications, skills, experience, competencies, and geographic location. Some roles may qualify for extra incentives like equity, commissions, or other variable performance-related bonuses. Further details will be provided by our recruiting team during the interview process.

This position requires access to information, or technology, which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a (i) citizen or national of the United States; or (ii) a lawful permanent resident of the United States (i.e. "Green Card Holder"); or (iii) a person admitted to the United States as a refugee, or granted asylum, as specified under applicable law.

Benefits

Benefit offerings include Medical Insurance and Prescription Drugs, Dental Insurance, Vision Insurance, Flexible Spending Accounts, Life Insurance, Short-Term Disability, Long-Term Disability Insurance (for eligible employees), Employee Assistance Plan (EAP), Paid Time Off (may include vacation and sick time), Retirement Program, and Other Voluntary Benefits.

Click here for more information: www.trimasbenefits.com