Principal Technology Development Engineer

DUTIES AND RESPONSIBILITIES:

• Set up and perform process and device simulations to determine initial process parameters, capabilities, and direction for optimization of new process flows.
• Design and perform experiments and analyze the results to determine the process sequences and parameters which will yield the target device parameters, by using the results of the process simulations or initial test lots as a starting point.
• Analyze data (electrical, in-process measurement or visual inspection) from the fabrication of test lots to determine which parameters require additional optimization.
• Work with Process Engineering to develop, characterize, and optimize process modules.
• Support the processing of the initial test chip and transfer lots fabricated with the new process to identify and correct any problem areas and work to achieve first-pass success.
• Provide inputs to and work with Device Engineers to develop layout rules for the process being developed, using equipment specifications and experimental data.
• Recommend test structures for and contribute to the layout of test chip mask sets to aid in developing the new process and evaluating specific process-dependencies of device parameters.
• Provide weekly, monthly, quarterly development updates to upper management and external customers.
• Support company initiatives, such as; quality, safety and environmental management, CQI, 5S, yield management, and cost containment
• Perform other duties as required.

KNOWLEDGE, SKILLS, AND ABILITIES:

Strong knowledge of several of the following, as needed to perform exact duties:

• Working knowledge of key front-end process modules (Silicon, Epi, Diffusion, Etch, Photo, Thin Films, etc.)
• Process Integration Experience in Power Trench MOSFET's (Needed)
• Process Integration Experience in CMOS/BCDMOS (Desired)
• Understanding of Device Physics of Power Devices and Charge Balanced Devices
• Experience in Process Flow Design to Achieve Manufacturability Metrics and Meet Electrical Test Targets
• Experience with and Understanding of Electrical Test Data and its Correlation to Process and Cross-sectional data
• Experience Interpreting Failure Analysis Results and Familiarity with Failure Analysis techniques
• Experience with Power Packaging including Assembly and Reliability issues
• Experience in Backend (BGBM, STM, etc.) Processes
• Experience in Development of Process, Technology and Design FMEA's

Skills

• DoE Design and Data Analysis Tools (JMP, Spotfire)
• TCAD Process Simulations
• Reading and Interpretations of Design Layouts
• Bi-lingual (English and Chinese preferred)

Abilities

• Working with and Interpreting Information/Data between Design and Process Teams
• Driving for Solutions and Collaborating on Cross-functional Teams
• Technical Leadership Ability (Education, experience and communication skills)

Typically requires a Masters or PhD in Electrical Engineering, Physics or Material Science and 5+ years of experience in a relevant job function.

SUPERVISORY RESPONSIBILITY:

None.

PHYSICAL DEMANDS/WORKING CONDITIONS:

Exposure to hazardous chemicals, high voltages and high equipment temperatures.

TRAINING REQUIREMENTS:

• Corporate and department orientations.
• Annual Right-To-Know.
• Annual Hazardous Waste Management.
• Annual EMS Training.
• ESD Awareness.
• Clean room procedures.

INTERNAL CONTACTS:

Operations Engineers (technical input/questions), Production Foreperson and Lead Operator (equipment scheduling), Production Operators (process instructions), Supervisor (instructions, update of results, technical discussions), and Development Technicians (work direction and result updates), Design Solutions Manager and Process Transfer Manager (technical discussions related to the new process and its transfer to production), Device Engineers (device layout and process compatibility discussions), Applications Engineers (input and answers to customer questions), and (Marketing) Project Managers (project definition, schedules, and status).

EXTERNAL CONTACTS:

Vendors (process equipment and materials procedures). Customers current and potential (reviews of the capabilities and status of new processes).

Great Benefits for full time employee including:

Medical, Dental and Vision Insurance

PTO from day one

401k and generous company match

Tuition assistance

Disability and life insurance

Legal and ID theft insurance

Employee Assistance Program

Annual Incentive Program (AIP)

And More!